$1,500.00

The ultimate surron upgrade!

 

Available as a rebuild of stock pack or drop in with polycarbonate casing.

(BE SURE TO CLICK THE BOX FOR POLYCARBONATE CASE IF PURCHASING DROP IN)

 

 

20s10p 72v30ah using Sony vtc6 18650 cells (3000mah 20/30amp) Samsung 30q available upon request 

200amp continuous , over 300amp peak

50amp Bluetooth BMS for charging with dual temp sensors.

Real time balancing (static balance) meaning it doesnt just balance when on the charger

Fully programmable parameters including the ability to set hvc for cell groups to stop the charge early. (I.E 4.1v per cell instead of 4.2v)

 

This battery DOES Bypass the bms for discharge.

(Available with 300amp ant bms for additional $100.00) please click box below for upgrade.

 

THIS OPTION IS MADE TO WORK HAND IN HAND WITH THE ERT TUNED ASI BAC CONTROLLERS FROM ELECTRICRT.COM

The NXT touchscreen display (as well as without it using the bac controller programming) is made to monitor and protect the battery from over discharge.

Due to the bms bypass it is vital to monitor the voltage of this battery pack. 

 

If you are NOT using ERT software/programming to handle LVC you can do so manually by monitoring voltage real time via bluetooth app or by using your bikes display.

Use the 8 7 6 rule. 

80s is full charge, 70s is middle ground and 60s is getting low. 

60 is ABSOLUTE ZERO (cell spec is 2.5v per cell so 50v is actual lvc) 

USING 60V AS 0 LEAVES PLENTY OF ROOM FOR ERROR. 

So long as you follow this rule you will get years of use from these upgrades. 

 

OTHER OPTIONS:

17s12p 60v36ah using Sony vtc6 18650 cell 

17s12p 60v 42ah using LG MJ1 18650 cell 

 

ATTENTION: 

ALL BATTERY PACKS ARE HAND MADE TO PERFECTION. ALL CELLS ARE PURCHASED FROM REUPTABLE DEALERS, INDIVIDUALLY CHECKED FOR INTERNAL RESISTANCE/VOLTAGE AND SORTED ACCORDINGLY. 0.15MM PURE NICKEL PLATING(STACKED IN MOST LOCATIONS TO 0.3MM) IS USED THROUGHOUT THE ENTIRE PACK. THE 2 HALVES ARE CONNECTED BY 6X INDIVIDUAL 12GUAGE SILICONE WIRES. DISCHARGE IS 8 GUAGE SILICONE TO OSE-8 AND CHARGE IS 12 GUAGE SILICONE XT60. 

OTHER CONNECTORS ARE AVAILABLE UPON REQUEST BUT I HIGHLY SUGGEST USING THE OSE-8 WITH ITS ANTISPARK  ALONG WITH THE PROVIDED ADAPTER TO SUPRA 6MM CONNECTOR(SURRON BATTERY PLUG) 

 

APPROX 2 WEEK LEAD TIME FROM DATE OF ORDER 

 

 

 

*NOW AVAILABLE AS A DROP IN WITH 1/8 POLYCARBONATE SIDE PANELS, RUBBER MARINE SHRINK FINISH AND HANDLE. 

Please allow up to 2 weeks lead time for fabrication of case.

 

Please remember when upgrading the surron battery you will need a compatible 72v charger with 84v output.

Current Stock:
Warranty:
*Disclaimer Lite Speed Bikes LLC is not responsible for any accidents, fire outbreak, explosions or any kind of injury and damage to your bikes due to the use of our batteries and products. Please take all necessary precaution with the use of our products. 1 year warranty on battery non physical damage only.
Polycarbonate casing for Surron Drop-In
72v (2-12amp adj.) Charger for surron upgrade
72v 4amp Waterproof Charger
5v 2amp USB handlebar charger mount
72v 6.5amp LCD display charger (84v output)
Upgrade to 300amp ant bms (non bypass)

No Reviews Write a Review